D&D Guns - ARES Defense AAR Upper Receiver

Ares Defense AAR™
AR-15 / M-16 Upper Receiver

OUT OF STOCK FOR NOW, EXPECTING MORE IN SOON

Standard Model

This is the new Ares Defense AAR AR-15 / M-16 upper receiver. It is part of the SHRIKE weapon system. This is basically the SHRIKE minus the belt feed mechanism. It comes as pictured above.

Note: Lower assembly & bipod is NOT part of what you are buying.

This upper is made with the same quality craftsmanship that all ARES Defense Products have come to be know for. The base model above comes w/ the following options.

* Dual-feed system with optional belt-feed module*

* Piston Operated *

* Quick Change Barrel *

* Fold up charging handle *

* MIL-STD-1913 optics mount on top cover *

* Adjustable Gas Regulator *

* Removable front & rear sights *

* Accepts all SHRIKE barrels,12.5”, 14.5”, 16.25” and 20” lengths *

* Standard barrels shipped with all uppers is the 16.25" barrel (see picture below) *

CLICK HERE FOR ARES BROCHURE that include the AAR Upper

Rail Interface Model Add $675.00 @ time of purchase

AAR-Ares Automatic Rifle pictured with 100 round BETA C-Mag and quick-change barrels. Barrels shown are 12.5”, 14.5”, 16.25” and 20” lengths

AAR-Ares Automatic Rifle

Lightweight Individual Automatic Rifle for squad support. The AAR™ is an upper receiver “performance upgrade kit” to existing AR15/M16 and M4 weapons and is designed for rapid and sustained engagement of point and area targets. The Ares Defense AAR™ is a member of the Shrike 5.56 –Advanced Weapons System™ family and features a quick-change barrel with short-stroke piston, adjustable gas regulator, removable rear sight & fold up non-reciprocation charging handle. MIL-STD-1913 optics mount on top cover is standard and the system can be equipped with optional MIL-STD-1913 rail interface handguard for mounting of current accessories. Weapon feeds from both 30 and 100 round magazines and can be user configured in minutes to patented dual-feed system with optional belt-feed module.

We have these IN STOCK NOW.

Priced @ $2995.00
Rail Interface Handguard $675.00 @ time of Order
Extra barrels - POR
If you decide at a later date to add the rail interface handguard there
will be an additional $100.00 charge to install it (this is a factory installed item only)

Click on picture below for a larger view

Defense prides itself on quality and attention to detail in all of its products and it’s AAR™ is no exception. Manufactured of the highest quality aircraft alloys, all aluminum surfaces are hardcoat Ares -anodize finished per MIL-A-8625 Type III, Class 2 for corrosion and wear resistance. Pictured at center is the barrel release lever which permits a barrel change in as little as 3 seconds!

Further attention to detail in the Ares Defense AAR™ is visible in this image showing the rear sight, top-cover release button and folding charging handle. Note the fit and finish between parts and that all sharp corners have a radius where appropriate to protect the operator.

The gas block, gas regulator and front sight assembly of the Ares Defense AAR™. Front sight is adjustable for both elevation and windage and can be removed altogether if necessary. The 4-position gas regulator is adjustable for belt-feed 1, belt-feed 2, a reduced-flow magazine/suppressor setting and a gas cut-off setting to prevent the weapon from automatically cycling when desirable. The counter bore visible in the handguard’s front bulkhead (behind the front sight block) is designed to accept a quick-detach, top-mounted ambidextrous sling swivel.

AAR-Ares Automatic Rifle is supported by the optional bipod when the quick-change barrel is removed. Pictured is the standard 16.25” and optional 12.5” barrel. Thick insulated lower handguard liner is provided to protect the operator’s hand from the high heat associated with sustained automatic firing. The top of the alloy handguard is well ventilated to permit faster heat dispersion during hard use.

Details of the Ares Defense AAR™ barrels are shown in this close-up of the gas block assemblies. As noted elsewhere, each quick-change barrel has its own piston, cylinder, gas regulator and adjustable front sight assembly. Each gas block is also factory prepared with a receptacle for an optional hot barrel removal handle.

The robust bolt and barrel extension of the Ares Defense Shrike 5.56™ are used in the Ares Defense AAR™. Notice the lugs on both parts are thicker and designed with a tangent radius profile for increased strength, safety and durability. Manufactured of the highest grade super-alloys and heat treated to exact specifications, these critical parts are specifically designed to handle tremendous amounts of sustained automatic firing from a belt-fed weapon.

The gas regulator and piston are readily removed from the front of the Shrike 5.56/AAR™ gas block for routine cleaning and maintenance. A cartridge may be used to assist with the rotation of the regulator if carbon deposits build up during hard use.

Disassembly of the Ares Defense AAR™ bolt carrier group is simple and intuitive to anyone with field-stripping experience on an AR15/M16/M4 weapon. The high-mass bolt carrier slows the weapon’s cycle rate for increased performance and controllability while featuring an integral impact lug for durability

Complete disassembly and reassembly of the Ares Defense AAR™ is simple and accomplished in minutes without the use of any tools, other than a single 5.56x45mm cartridge. Designed for hard use, the modular AAR™ (a member of the Shrike 5.56 – Advanced Weapons System™ family) provides the modern operator with the adaptive firepower necessary to prevail on today’s battlefield

BACK

ARES Defense Systems & SHRIKE 5.56 are copyrighted trademarks of Ares Defense Systems

Defense prides itself on quality and attention to detail in all of its products and it’s AAR™ is no exception. Manufactured of the highest quality aircraft alloys, all aluminum surfaces are hardcoat Ares -anodize finished per MIL-A-8625 Type III, Class 2 for corrosion and wear resistance. Pictured at center is the barrel release lever which permits a barrel change in as little as 3 seconds!	Further attention to detail in the Ares Defense AAR™ is visible in this image showing the rear sight, top-cover release button and folding charging handle. Note the fit and finish between parts and that all sharp corners have a radius where appropriate to protect the operator.	The gas block, gas regulator and front sight assembly of the Ares Defense AAR™. Front sight is adjustable for both elevation and windage and can be removed altogether if necessary. The 4-position gas regulator is adjustable for belt-feed 1, belt-feed 2, a reduced-flow magazine/suppressor setting and a gas cut-off setting to prevent the weapon from automatically cycling when desirable. The counter bore visible in the handguard’s front bulkhead (behind the front sight block) is designed to accept a quick-detach, top-mounted ambidextrous sling swivel.
AAR-Ares Automatic Rifle is supported by the optional bipod when the quick-change barrel is removed. Pictured is the standard 16.25” and optional 12.5” barrel. Thick insulated lower handguard liner is provided to protect the operator’s hand from the high heat associated with sustained automatic firing. The top of the alloy handguard is well ventilated to permit faster heat dispersion during hard use.	Details of the Ares Defense AAR™ barrels are shown in this close-up of the gas block assemblies. As noted elsewhere, each quick-change barrel has its own piston, cylinder, gas regulator and adjustable front sight assembly. Each gas block is also factory prepared with a receptacle for an optional hot barrel removal handle.	The robust bolt and barrel extension of the Ares Defense Shrike 5.56™ are used in the Ares Defense AAR™. Notice the lugs on both parts are thicker and designed with a tangent radius profile for increased strength, safety and durability. Manufactured of the highest grade super-alloys and heat treated to exact specifications, these critical parts are specifically designed to handle tremendous amounts of sustained automatic firing from a belt-fed weapon.
The gas regulator and piston are readily removed from the front of the Shrike 5.56/AAR™ gas block for routine cleaning and maintenance. A cartridge may be used to assist with the rotation of the regulator if carbon deposits build up during hard use.	Disassembly of the Ares Defense AAR™ bolt carrier group is simple and intuitive to anyone with field-stripping experience on an AR15/M16/M4 weapon. The high-mass bolt carrier slows the weapon’s cycle rate for increased performance and controllability while featuring an integral impact lug for durability	Complete disassembly and reassembly of the Ares Defense AAR™ is simple and accomplished in minutes without the use of any tools, other than a single 5.56x45mm cartridge. Designed for hard use, the modular AAR™ (a member of the Shrike 5.56 – Advanced Weapons System™ family) provides the modern operator with the adaptive firepower necessary to prevail on today’s battlefield
BACK